Replacing The Starter Rope And Rewind Spring - Stihl MS 461 Manual De Instrucciones

English
Installing the spark plug
2
1
Screw in the spark plug
N
Press on the spark plug boot (1)
N
firmly
Insert the air baffle (2) from above
N
Mount carburetor box cover
N
42
Replacing the Starter Rope
and Rewind Spring
Removing the Fan Housing
Take out the screws (1).
N
Push the hand guard upwards.
N
Pull the underside of the fan
N
housing away from the crankcase
and remove it downwards.
Replacing a broken starter rope
2
3
4
Use a screwdriver or suitable pliers
N
to remove the spring clip (2) from
the starter post.
Carefully remove the rope rotor with
N
washer (3) and pawls (4).
The rewind spring may pop out and
uncoil during this operation – take care
to avoid the risk of injury.
Use a screwdriver to pry the rope
N
out of the starter grip.
Remove the remaining rope from
N
the rotor and starter grip.
Thread the new rope through the
N
top of the starter grip.
4
MS 461