Philips Essence HR7750 Instrucciones De Uso página 9

4 Put the pusher in the feed tube.
C
5 Select the maximum speed (position 2) on
the speed control.
- The process will continue until switched to
position 0 (off).
Switch to position 1 to decrease the speed.
Tips
If you chop onions, use the pulse function
several times to prevent them from becoming
too finely chopped.
Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will become too hot, will start to melt and
will turn lumpy.
Do not use the blade to chop very hard
ingredients like coffee beans, turmeric, nutmeg
and ice cubes, as this may cause the blade to
get blunt.
If food sticks to the blade or to the inside of the
bowl:
1 Turn the appliance off.
2 Remove the lid from the bowl.
3 Remove the ingredients from the blade or
from the wall of the bowl with a spatula.
Inserts
Never process hard ingredients like ice cubes
with the inserts.
C
1 Put the selected insert in the insert holder
1
before you place it onto the toolholder.
2
Cutting edges are very sharp. Avoid touching
CLICK
them!
C
2 Place the insert holder onto the tool
holder that stands in the bowl.
3 Put the lid on the bowl.
4 Put the ingredients in the feed tube. Pre-
cut large chunks to make them fit into the
feed tube.
C
5 Fill the feed tube evenly for the best
results.
When you have to cut large amounts of food,
process only small batches at a time and empty
the bowl regularly between the batches.
C
6 For shredding and slicing, select the
maximum speed (position 2) on the speed
control.
The process will continue until switched to
position 0 (off).
Switch to position 1 to decrease the speed.
ENGLISH
9