EdilKamin INPELLET 49 Instalación Uso Y Mantenimiento página 26

OPTIONAL SUPPORT
1) Assemble the two vertical walls (works both sides) according to fi gure no. 1.
The arrow engraved on the walls indicates the direction from the rear to the front.
2) Assemble the two strengthening fl aps (A), fi xing them with the bolts supplied (fi g. n° 2).
3) Position the support plate (P) on the assembled walls and lock it rigidly in place using the 4 bolts supplied (fi g.no. 3).
4) You MUST fi x the support to the fl oor using the 4 fi tting supplied (B - fi g. no. 3).
Failure to comply with the above may cause the INPELLET 49 to upturn at serious risk to the user.
ONLY position the INPELLET 49 on its support once fi xed to the fl oor.
N.B. For a correct installation, place the walls in such a ways so that the arrows engraved on them are not visible on the
front part; they must both be on the back part.
Moreover, the folds of the walls must be directed towards the front part of the support (fi g. no. 3).
2
1
A A
A
3
P
B
B
Folded towards fron
B
- 26
-