Getting Your Phone Started; The Battery; Turning The Phone On And Off - LG Verizon VX3200 Manual Del Usuario

Getting Y our Phone Star
Getting Y our Phone Star

The Battery

NOTE: It is important to fully charge the battery before initial use of
the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk and standby
time. The battery charge level is shown at the top of the LCD
screen.
Installing the Battery
To install the battery, insert the battery into the opening on the
back of the phone. Put the battery cover on the battery and
push it slightly upwards.
Removing the Battery
Turn the power off. While pressing the PUSH button on the back
of the phone, pull the battery cover downwards and remove it.
Then remove the battery by pressing the upper area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone. Using
any charger other than the one included with the VX3200 may
damage your phone or battery.
1. Plug the round end of the adapter into the phone's charger
jack and the other end into an electrical outlet.
2. The charge time varies depending upon the battery level.
The maximum charge time for a fully discharged battery is
3.5 hours.
16 VX3200
ted
ted
Battery Charge Level
The battery charge level is shown at the top right of the LCD
screen. When the battery charge level becomes low, the low
battery sensor alerts you in three ways: sounding an audible
tone, blinking the battery icon, and displaying
If the battery charge level becomes exceedingly low,
WARNING!
the phone automatically switches off and any function in
progress is not saved.
Fully Charged

Turning the Phone On and Off

Turning the Phone On
1. Install a charged battery or connect the phone to an
external power source such as a cigarette lighter charger
or hands-free car kit.
2. Press for a few seconds until the LCD screen lights up.
NOTE: Like any other radio device, avoid any unnecessary
contact with the antenna while your phone is on.
Turning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your area. The signal
strength is indicated on the screen as the number of bars next to the
signal strength icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If you are in a
building, the reception may be better near a window.
LOW BATTERY
Fully Discharged
VX3200
17