Troubleshooting - Skil SR6604B-00 Manual Del Propietário

TROUBLE SHOOTING
Problem
Tool will not start
16
Cause
1. Battery pack is depleted.
2. Tool is over-loaded.
3. Battery pack is over
temperature.
4. Battery pack is not installed
properly.
5. Burned out switch.
Remedy
1. Charge the battery.
2. Turn off the tool and then try
again.
3. Turn off the tool and allow
the battery pack to cool
under air flow.
4. Confirm that the battery is
locked and secured to the
tool.
5. Have the switch replaced by
an Authorized SKIL Service
Center or Service Station.