Electrical - Milwaukee M4910-10 Manual Del Operador

EXTENSION CORDS
Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the product's plug.
When using a paint sprayer at a considerable distance from
the power source, use an extension cord heavy enough to
carry the current that the product will draw. An undersized
extension cord will cause a drop in line voltage, resulting in
a loss of power and causing the motor to overheat. Use the
chart provided below to determine the minimum wire size
required in an extension cord. Only round jacketed cords
listed by Underwriter's Laboratories (UL) should be used.
**Ampere rating (on product data plate)
0-2.0 2.1-3.4
Cord Length Wire Size (A.W.G.)
25' 16 16
50' 16 16
100' 16 16
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
When working with the product outdoors, use an extension
cord that is designed for outside use. This is indicated by the
letters "W-A" or "W" on the cord's jacket.
Before using an extension cord, inspect it for loose or
exposed wires and cut or worn insulation.
PRODUCT SPECIFICATIONS
Flow Rate ............................................................0.24 GPM
Fluid Pressure................................................... 0-2,800 PSI
KNOW YOUR AIRLESS PAINT SPRAYER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
2800 PSI PIStoN PUmP
Maintains pressure as needed for different applications.
25 FT. HIGH PRESSURE HOSE
The 25 ft. high pressure hose allows the user to spray a larger
area without moving the paint sprayer.

ELECTRICAL

3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
16 16 14
16 14 14
14 12 10
FEATURES
WARNING:
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on lumber,
paint sprayer, or other obstructions while you are working
with a paint sprayer. Failure to do so can result in serious
personal injury.
WARNING:
Check extension cords before each use. If damaged
replace immediately. Never use the product with a
damaged cord since touching the damaged area could
cause electrical shock resulting in serious injury.
14
ELECTRICAL CONNECTION
12
This product is powered by a precision-built electric motor. It
—
should be connected to a power supply that is 120 V, AC only
(normal household current), 60 Hz. Do not operate this
product on direct current (DC). A substantial voltage drop
will cause a loss of power and the motor will overheat. If
the product does not operate when plugged into an outlet,
double check the power supply.
Input ................................... 120 V, AC only, 60 Hz, 7 Amps
Weight ...................................................................... 19 lbs.
AIRLESS SPRAYING MODE
The pressurized fluid moving through the spray nozzle will
be atomized as it is sprayed.
RAPID VALVE RELEASE
Dried paint or other debris can clog the check valve and
prevent the unit from priming correctly. Pressing the Rapid
Valve Release button before each start keeps paint flowing
cleanly through the check valve and allows quick and easy
start-up of the unit.
HOSE SWIVEL
Built-in hose swivel on the pistol-grip sprayer offers greater
flexibility while painting.
INTAKE FILTER
The intake filter keeps debris from entering the paint system.
7 — English