Features; Assembly - Milwaukee M4910-10 Manual Del Operador

ON-BOARD ACCESSORY STORAGE
Paint sprayer includes on-board accessory storage for
convenient access to wrenches, spray tip, and pump
protector bottle.
PRIME/SPRAY SELECTOR
Allows you to switch from prime mode to spray mode.
UNPACKING
This product requires assembly.
 Carefully lift the product from the carton and place on a
level work surface.
WARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the paint sprayer.
 If any parts are damaged or missing, please call
1-877-203-0880 for assistance.
LOOSE PARTS LIST
See Figure 1.
Description
Pistol-Grip Sprayer With with Nozzle Tip Guard (G)........1
515 Reversible Spray Tip (N) ...........................................1
25 Ft. High Pressure Hose (O) .........................................1
Garden Hose Adaptor (R) ................................................1
Wrenches (F)....................................................................2
Pump Protector Bottle (Q) ...............................................1
Pump Protector Powder (P) ............................................1
Operator's Manual (Not Shown) ......................................1

FEATURES

VARIABLE PRESSURE CONTROL
 Lower pressure is for priming, cleaning, rolling, and for
thinner materials.
 Higher pressure is ideal for latex and airless spraying
applications.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
paint sprayer until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this paint sprayer or create
accessories not recommended for use with this paint
sprayer. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
CONNECTING HIGH PRESSURE HOSE/
Qty. PISTOL-GRIP SPRAYER
See Figure 2.
To connect the high pressure hose to the paint sprayer:
 Screw the collar of the high pressure hose onto the paint
connect outlet.
 Tighten securely with wrench provided.
To connect the pistol-grip sprayer to the high pressure
hose:
 Screw the collar on the high pressure hose onto the
pistol-grip sprayer by turning the hose collar clockwise.
 Using the wrenches provided, hold the nut on the pistol-
grip sprayer still while tightening securely the nut on the
high pressure hose.
8 — English