Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING
This product requires assembly.
 Carefully lift the product from the carton and place on a
level work surface.
WARNING:
Do not use this product if any parts on the Loose Parts
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-877-203-0880 for assistance.
LOOSE PARTS LIST
See Figure 2.
Description
5 Gallon container lid ......................................................1
DUAL-ACTION™ pistol-grip sprayer with
Nozzle tip guard ..............................................................1
Wheel .............................................................................2
Axle....... ...........................................................................2
Washer ............................................................................2
Hitch pin ..........................................................................2
25 Ft. air hose ..................................................................1
25 Ft. high pressure hose ................................................1
310 Reversible spray tip ..................................................1
619 Reversible spray tip ..................................................1
Garden hose attachment .................................................1
Elastic strap .....................................................................1
Operator's manual (not shown) .......................................1
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.

ASSEMBLY

WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
TOOLS NEEDED
Adjustable wrench
INSTALLING THE WHEELS
See Figure 3.
To attach the wheels to the base:
 Locate the axle.
 Slip the axle through the wheel hole. Slide washer onto
axle.
 Lifting the paint sprayer slightly, slide the axle, wheel,
and washer into the wheel mounting hole in the machine
base.
 Push the hitch pin into the hole on the end of the axle to
secure assembly.
 Repeat with the second wheel assembly.
Qty.
FOLDING THE HANDLE
See Figure 4.
 To raise the handle: pull the handle up until the handle
release knob snaps through the locking hole to secure
the handle in place.
 To lower the handle (for storing): pull the handle release
knob on the right side of handle and lower.
WARNING:
Never use the handle to lift the paint sprayer. Failure
to heed this warning could result in serious personal
injury.
CONNECTING HIGH PRESSURE HOSE/
DUAL-ACTION™ PISTOL-GRIP SPRAYER
See Figure 5.
To connect the high pressure hose to the paint sprayer:
 Screw the collar of the high pressure hose onto the paint
connect outlet located on the control panel.
 Tighten securely with an adjustable wrench.
To connect the DUAL-ACTION™ pistol-grip sprayer to
the high pressure hose:
 Screw the collar on the high pressure hose onto the
pistol-grip sprayer by turning the hose collar clockwise.
 Use an adjustable wrench to turn and tighten the nut on
the hose end and tighten securely.
8 — English

Publicidad

Tabla de contenido
loading

Tabla de contenido