Disposal Of Waste Products - Jacto PJ-16 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Temperature below 30 C.
These limits should be considered according to technology ap-
plication that will be used, adopting the safest class drops within
the boundaries of each situation.
Air velocity around the nozzle
height
Up to 2km/h
2 to 3 km/h
3 to 7 km/h
7 to 10 km/h
10 to 15 km/h
Factors
Temperature
Relative humidity

4.5. Disposal of waste products

The elimination of waste resulting from the dismantling of
equipment during service, maintenance or end of life (disposal)
should be carried out respecting the environment, preventing
pollution of air, soil and water. If necessary, the waste should be
stored in appropriate locations and then transported by quali-
fied and trained people and companies.
Disposal of used sprayer should be done at appropriate points
and approved for receiving such material. If there isn't an appro-
priate nearby site, please contact the Customer attendance: Dr.
Luiz Miranda, 1650, 17580-000 – Pompeia – SP – Brazil. Phone:
+55 14 3405 2113. Email: assistencia.tecnicajsfs@jacto.com.br
Opening Hours: Monday to Friday 7:00am to 11:30am and
13:00pm to 17:18pm (Brazilian time zone).
Description
Calm
Nearly calm
Light breeze
Light wind
Moderate wind
Classes of drops according to weather conditions
Very thin or thin
below 25º C
above 70%
Visible signs
Smoke rises vertically
The smoke is tilted
The leaves range. Feel the light
wind
Leaves and thin branches in
constant motion
Movement branches. Dust and
pieces of paper are carried by
the wind
Thin or medium
25 to 28º C
60 to 70%
Visible signs
Recommended only with thick,
very thick drops
Ideal for spraying
We recommend only the drift
reduction technique
Improper for spraying
Medium or thick
above 28º C
below 60%
9/53

Publicidad

Tabla de contenido
loading

Tabla de contenido