Husqvarna AUTOMOWER 105 Manual De Usuario página 7

3. Carry the robotic lawnmower by the handle with the blade disc
away from the body.
Automower 105 Automower 310/315
IMPORTANT INFORMATION
Do not lift the robotic lawnmower when it is parked in the
charging station. It can damage the charging station and/
or the robotic lawnmower. Press STOP and instead first pull
the robotic lawnmower out of the charging station before
lifting it.
WARNING
Always use original blades and screws when repla-
cing. Only replacing the blades and reusing the
screw can result in a screw wearing during mowing
and shearing. The blades can then be propelled
from under the body and cause serious injury.
Maintenance
WARNING
When the robotic lawnmower is turned upside
down the main switch must always be in the 0
position.
The main switch must be set in the 0 position
during all work on the mower's chassis, such as
cleaning or replacing the blades.
Inspect the robotic lawnmower each week and replace any damaged or
worn parts. The following must be carried out in the weekly inspections:
1. Clean the charging station from grass, leaves, twigs and other
objects that may impede the robotic lawnmower from docking with
the charging station.
2. Set the main switch to position 0 and put on a pair of protective
gloves.
3. Turn the robotic lawnmower upside down. Check the following:
• Clean the wheels and axles. Grass
ence operation on slopes.
• Clean the body, chassis and cutting system. Grass, leaves and
other objects that weigh down the product affect performance.
• Check that all mower blades are intact. Check also that the
mower blades can pivot freely. Even if the mower blades are
intact, they must be replaced on a regular basis for the best
mowing result and low energy usage. Replace all blades and
screws at the same time if necessary so that the rotating parts
are kept balanced.
ENGLISH
Automower 420/430X/440/450X
on the drive wheels can influ-
English - 7