Control Panel Automower ® 310/315/420/430X/440/450X; Operation Selection Start - Husqvarna AUTOMOWER 105 Manual De Usuario

Ocultar thumbs Ver también para AUTOMOWER 105:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation selection
By consecutively pressing the Operation selection button many times,
one can choose between three different operation modes.
HOME. Sends the robotic lawnmower to the charging station. It
remains here until another operation mode is selected. The text
Home is shown in the operation window. When the battery is fully
charged, the robotic lawnmower will remain parked in the charging
station. The robotic lawnmower will first leave the charging station
and begin mowing again when the operation selection is altered to
AUTO.
The Home setting is also used after a new installation or when
changes are made to an existing installation to test if the robotic
lawnmower can follow the guide wire and dock with the charging
station.
AUTO. The standard, automatic operation mode where the robotic
lawnmower mows and charges automatically.
MAN. When mowing secondary areas the MAN setting must be
used. If MAN is selected and the robotic lawnmower starts when it
is out on the lawn, it will mow until the battery runs out. It will then
stop and the 'Needs manual charging' message will appear. The
robotic lawnmower must then be moved manually to the charging
station and then started manually after charging. If the robotic
lawnmower charges in the MAN mode, it will fully charge, move
about 20 cm / 8 " out of the charging station and then stop. This
indicates that it is charged and ready to start mowing.
4.2 Control panel Automower
310/315/420/430X/440/450X
When the stop button has been pressed and the hatch is opened, the
start page is displayed showing the following information:
Operating information, e.g. READY, MOWING, PARKED or TIMER.
READY is displayed if the robotic lawnmower is not in any specific
operating mode, e.g. if the main switch has just been turned on.
If the STOP button is pressed the robotic lawnmower displays what
it did prior to the stop, e.g. MOWING or SEARCHING.
Date and clock show the current time.
For Automower
430X/450X: The satellite symbol is shown when
®
the GPS-supported navigation is activated. Symbol (A) is shown
when the robotic lawnmower has made contact with a sufficient
number of GPS satellites. Symbol (B) shows when the robotic
lawnmower has not made contact with a sufficient number of GPS
satellites. Symbol (A) blinks during the first days the robotic lawn-
mower is working, as it is collecting GPS information about the
installation.
The ECO symbol is displayed if the robotic lawnmower is set in
ECO mode.
The black clock symbol (A) is shown when the mower is not allowed
to mow due to a timer setting. If the mower is not allowed to mow due
to Weather timer, symbol (B) is shown. If the operation mode Overr-
ide timer is chosen, symbol (C) is shown.
ENGLISH
The keypad consists of six groups of buttons:
®

Operation selection Start

When the START button has been pressed the following operation
selections can be selected:
The battery status shows the remaining battery charge. If the robo-
tic lawnmower is loading, a flash is also shown over the battery
symbol (A). If the robotic lawnmower is placed in the charging sta-
tion without charging, (B) is shown.
The height adjustment setting is displayed as a scale/numerical
value.
The number of operating hours indicates the number of hours
since the day of manufacture that the robotic lawnmower has spent
mowing or searching for the charging station.
The START button is used to activate the robotic lawnmower. This
is normally the last button to be pressed before closing the hatch.
The BACK and OK buttons are used to navigate in the menu. The
OK button is also used to confirm settings in the menu.
The arrow keys are used to navigate in the menu but also to make
selections in certain setting options.
The MENU button is used to go to the main menu.
The PARK button is used to send the robotic lawnmower to the
charging station.
Numbers are used to enter settings, for example, PIN code, time
or exit direction.
MAIN AREA. The standard, automatic operating mode where the
robotic lawnmower mows and charges continually.
SECONDARY AREA. is used when mowing secondary areas
where the robotic lawnmower cannot travel to the charging station
automatically.
If the robotic lawnmower charges in the Secondary area mode, it
will fully charge, drive out about 50 cm / 20 " and then stop. This
indicates that it is charged and ready to start mowing.
If the main working area has to be cut after charging, it is appro-
priate to switch the operation selection to Main area before placing
the robotic lawnmower in the charging station.
OVERRIDE TIMER. Any timer settings made can be temporarily
overridden by selecting Override timer. It is possible to override the
timer for 24 h or 3 days.
SPOT CUTTING (Not available for Automower
robotic lawnmower will work in a spiral pattern in order to cut the
grass in the area where the grass has been mown less than in
other parts of the garden.
The Spot Cutting function is activated with the START button. You
can select how the robotic lawnmower should continue to work
once mowing is finished by pressing Right Arrow and then specify-
ing Main Area or Secondary Area.
310) means the
®
English - 13

Publicidad

Tabla de contenido
loading

Tabla de contenido