Battery Charging Status; To Start The Product; To Use The Save Function - Husqvarna LE121P Manual Del Usuario

Battery charging status

A Husqvarna Li-ion battery can be charged or used at all
charging levels. The battery is not damaged. A fully
charged battery will not decrease its charge when the
battery is left in the charger.
LED display
LED 1 flashes
LED 1 is lit, LED 2 flashes 25%-50%
LED 1, LED 2 are lit, LED
3 flashes
LED 1, LED 2, LED 3 are
lit, LED 4 flashes
LED 1, LED 2, LED 3,
LED 4 are lit

To start the product

1. Put a charged battery in battery compartment
number 1 below the battery lid. For longer operation
time, put a second charged battery in battery
compartment number 2.
2. Turn the safety key to 1.
3. Stay behind the product.
4. Press the ON/OFF button (A) on the control panel
and the green LED (B) comes on.
A
B
14
Charging status
0%-25%
50%-75%
75%-100%
Fully charged
5. Loosen the start inhibitor.
6. Push the motor brake handle in the direction of the
handlebar.
To use the drive on the wheels (LE
221R)
• Pull the drive bail in the direction of the handlebar to
start the drive.
• Press + and - on the control panel to set the drive
speed in 4 steps.
• Release the drive bail to disengage the drive, for
example when you go near an obstacle.

To use the SavE function

The product has a battery saving function (SavE) that
gives longer operation time.
428 - 002 -