1. Get started
■ Install and remove the battery
Note: Always switch off the power and disconnect the
charger and any other device before removing the cover.
Avoid touching electronic components while changing
the cover. Always store and use the device with the
cover attached.
1. To remove the cover, with the
back of the device facing you,
press the bottom part (A) of
the device, and slide the back
cover towards the upper part
of the device (B).
2. To insert the battery, position
the battery so that the
gold-colored contacts match
up with those on the device,
and insert the battery into the
battery slot.
10