Maintenance And Care - Würth Modulares System Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Assembly of the long-components
tray
onto suspended assembly
LW
brackets
MWLR
We recommend assembling the long-compo-
nents tray directly onto the respective WÜRTH
equipment components. Where this is impos-
sible, assemble the LW to the side wall of the
vehicle with the help of the intended assembly
brackets MWLR.
The assembly brackets can be shaped as
required via concentric trimming. Connect the
bracket with a previously drilled hole featuring
a diameter of 8.5 mm to the reinforcing plate
welded to the lower side.
Attachment to the side panel follows Chapter
Mounting on side panels in these As-
sembly Instructions.
Once the mounting brackets are attached to the
vehicle side panel (at least three per long-com-
ponents tray), the LW is placed on the brackets,
aligned and fixated (e.g. with screw clamps).
Drill and seal the attachment holes (at least two
per bracket).
Screw the LW to the brackets using the provided
attachment material.
For additional load safety, we
recommend the lashing strap SG45
(Art. 0963 80 209).
22

Maintenance and care

Regular maintenance and care is indispensable for
the value retention and functionality of your vehicle
equipment.
Keep moving parts clean and lubricate regu-
larly.
Secure aggressive liquids and gases against
leakage or escape.
The components are only resistant to
aggressive media to a certain extent.
Check the equipment's attachment regularly.
For your own protection, keep the equipment
clean and secure loaded goods.
We would like to point out that non-com-
pliance with these care and maintenance
instructions may render your warranty
claims invalid.
The information on technical data, delivery scope,
appearance, dimensions and warranty regulations
in these instructions correlate with information
relevant at the time of print. We expressly reserve
the right to change this information on the basis of
modified legal regulations or more recent technical
knowledge.
Adolf Würth GmbH & Co. KG
Dimbacher Straße 42
74182 Obersulm - Willsbach
Germany

Publicidad

Tabla de contenido
loading

Tabla de contenido