Bread Maker Functions - BOMANN BBA 566 CB Instrucciones De Servicio

2 FARBE button
Press this button to set the desired browning: HELL - MITTEL –
DUNKEL.
Duration in
No. Program name
1 NORMAL
2 WEISSBROT
3 VOLLKORN
4 SCHNELL
5 SÜSSES BROT
6 ULTRA SCHNELL I
7 ULTRA SCHNELL II
8 TEIG
9 MARMELADE
10 KUCHEN
11 SANDWICH
12 BACKEN
4 START/STOPP button
to start and end the program.
• After pressing the START/STOPP button the dots on the time
display start flashing.
• Press the START/STOPP button at any time to cancel the
program. Press and hold until on long acoustic signal sounds. The
status indicator turns off. The display shows the start position of
above start program. Press the
different program. Depending on the operation mode you may have
to wait for the appliance to cool down.
NOTE:
When a program is running, do not press the
if you still want to add ingredients! The program would otherwise end.
6 TEIGMENGE button
In some programs you can set the following levels:
Level I = for a lower bread weight of up to 750 g
Level II = for a higher bread weight of up to 1000 g
The levels affect the baking time.
7 / Time buttons
Use the timer function to set the end time for a selected program. This
function is available for the following programs:
NORMAL
WEISSBROT
VOLLKORN
SCHNELL
SÜSSES BROT
TEIG
KUCHEN
SANDWICH
BACKEN.
The programs ULTRA SCHNELL and MARMELADE cannot be started
with delay.
WARNING:
When using the delayed baking function, make sure the appliance will
not be unattended during operation.
48
h:mm
3:00 for white and brown bread. This program is mainly used.
3:50 for especially light white bread.
3:40 for wholewheat bread
1:40 for fast preparation of white and brown bread
2:55 for preparing sweet leavened bread
0:58 for kneading and baking bread up to 750 g
0:58 for kneading and baking bread up to 1000 g
1:30 for preparation of dough
1:20 for cooking jam and marmalade
2:50 for pastries containing baking powder
3:00 for preparation of light sandwich bread
1:00 for baking bread or cake another
AUSWAHL button to select a
START/STOPP button
3 AUSWAHL button
Press the AUSWAHL button to access the individual programs. The
programs are used for the following types of bread:
Description
• Press the / buttons to set the end time for the program.
NOTE:
• Repeatedly press the /
the program by 10 minutes.
• The end of the program can be delayed for a maximum of
13 hours.
• When selcting another program, the previous timer setting will be
deleted.
• Do not use the timer function for recipes with perishable ingredi-
ents such as milk, eggs, fruits, yoghurt, onions, etc.!
Example: It is now 8:30 p.m. and you want the bread ready the next
morning at 7:00 a.m., in 10 hours and 30 minutes. Set this value (10:30)
on the display. It is not necessary to calculate the hours between the
desired start and end of the program (e.g. 3:00). The program will start
automatically for the bread to be ready at the set time.
• Press the START/STOPP button to activate the timer function.
The dots in the time display will be flashing and the status indicator
lights.
• In order to cancel the timer function, press the
button again until you hear a buzzer sound.

Bread Maker Functions

Buzzer sounds
The appliance emits different buzzer sounds:
1 long buzzer sound - when connecting the appliance to the
mains
- when manually terminating a program
- at the end of the keeping warm function
1 short buzzer sound When releasing a button.
5 buzzer sounds in The temperature of the appliance is too high
sequence and prevents the start of a new program. The
display will show "HHH".
10 buzzer sounds in The second kneading started. During certain
sequence during a programs you may add further ingredients
program (seeds, fruits, nuts, etc.).
Buzzer sound for
adding ingredi-
ents
yes
no
yes
no
no
no
no
no
no
yes
yes
no
buttons to move the end time of
START/STOPP