Connecting The Power Supply; Battery Safety; Installation - Husqvarna AUTOMOWER 105 Manual De Usuario

Ocultar thumbs Ver también para AUTOMOWER 105:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

and the indicator lamp is lit. The correct
PIN code must also be entered for the
product to start.
The product must never be used at the
same time as a sprinkler. Use the
Schedule function so the product and
sprinkler never run simultaneously.
Husqvarna does not guarantee full
compatibility between the product and
other types of wireless systems such as
remote controls, radio transmitters,
hearing loops, underground electric
animal fencing or similar.
The built-in alarm is very loud. Be careful,
especially if the product is handled
indoors.
Metal objects in the ground (for example
reinforced concrete or anti-mole nets) can
result in a stoppage. The metal objects
can cause interference with the loop
signal which then can lead to a stoppage.

3.1 Connecting the power supply

Take the following into consideration when
planning where to place the power supply:
Close to the charging station
Protection from rain
Protection from direct sunlight
WARNING:
be used with a power supply unit
supplied by Husqvarna.
When connecting the power supply, only use
a wall socket that is connected to an earth
fault-breaker (RCD).
WARNING:
Install only to an earth-fault breaker
(RCD) when connecting the power
supply to the wall socket. For USA/
CANADA: Use a covered Class A
GFCI receptacle (RCD) that has an
enclosure that is weatherproof with
1418 - 004 - 10.03.2020

3 Installation

The product is only to
Risk of Electric Shock.
Operation and storage temperature is
0-50 °C / 32-122 °F. Temperature range
for charging is 0-45 °C / 32-113 °F. Too
high temperatures might cause damage
to the product.

2.3 Battery safety

WARNING:
can explode or cause fire if
disassembled, short-circuited,
exposed to water, fire, or high
temperatures. Handle carefully, do
not dismantle, open the battery or
use any type of electrical/
mechanical abuse. Avoid storage in
direct sunlight.
For more information about the battery, refer
Battery on page 22
to
the attachment plug cap inserted or
removed.
WARNING:
supply must be changed or
tampered with. The low voltage
cable must not be shortened or
extended.
Low-voltage cables of different lengths are
available as accessories.
WARNING:
cable and extension cable must be
outside the work area to avoid
damage to the cables.
Lithium-ion batteries
No parts of the power
The power supply
Installation - 13

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido