Husqvarna BR600 Manual De Usuario página 216

• Keep first aid equipment close at hand.
Safety devices on the attachment
WARNING: Read the warning instructions
that follow before you use the attachment.
This section contains the attachment's safety features,
its purpose and how checks and maintenance should be
carried out to ensure that it operates correctly. See
instructions under the heading
page 2 to find where these parts are located on your
attachment.
The life span of the attachment can be reduced and the
risk of accidents can increase if attachment
maintenance is not carried out correctly and if service
and/or repairs are not carried out professionally. If you
need further information please contact your nearest
servicing dealer.
WARNING: Never use an attachment with
defective safety components. The
attachment's safety equipment must be
inspected and maintained as described in
this section. If your attachment fails any of
these checks, contact your service agent to
get it repaired.
WARNING: All servicing and repair work on
the product requires special training. This is
especially true of the product's safety
216
Attachment overview on
equipment. If your product fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your product is not a
servicing dealer, ask him for the address of
your nearest service agent.
Safety instructions for maintenance
WARNING: Always stop the product before
you do maintenance on the attachment. Be
careful, the attachment can continue to
move after the throttle/power trigger is
released. Make sure that the attachment has
stopped fully. If you have a gasoline
operated product, disconnect the HT leads
from the spark plug. If you have a battery
operated product, remove the battery.
• Check the entire product before starting. Replace
damaged parts.
• Check that all guards and covers are complete and
attached correctly. Examine all nuts and screws.
• If you have a gasoline operated product, make sure
that there are no fuel leaks.
• Check that the brush drums are not damaged and
show no signs of cracking or other damage.
738 - 003 - 13.12.2019