External Microphone Xa-Mc10; Pairing; Searching For A Bluetooth Device From This Unit - Sony MEX-BT5750U Manual De Instrucciones

External microphone XA-MC10

By connecting an external microphone to the
microphone input connector, you can improve
audio quality while talking through this unit.
Installing on the sun visor
External microphone
Clamps
Installing on the dashboard
Clamps
Connecting cord
Tip
You can set microphone priority (page 22).

Pairing

First, register ("pair") a Bluetooth device
(cellular phone, etc.) and this unit with each
other. You can pair up to 9 devices. Once pairing
is established, there is no need for pairing again.
Searching for a Bluetooth device
from this unit
Check that the other Bluetooth device is set to
allow for searching (discoverable) beforehand.
1
Press (BT).
The Bluetooth settings menu appears.
Connecting cord
External
microphone
2
Rotate the control dial to select
"Search," then press the select button.
The process of searching for a connectable
device begins, then the detected device
name(s) appear in a list. If a device name
cannot be received, Bluetooth Device
Address will be displayed.
Search time varies depending on the number
of Bluetooth devices.
3
Rotate the control dial to select the
device, then press the select button.
4
Select your desired connection,
"Handsfree Connect" or "Audio
Connect."
Pairing starts.
5
Input a passcode*.
Input the same passcode for this unit and the
connecting device using control dial or card
remote commander. The passcode can be
either your own selected number or the
number determined by the connecting device.
For details, see the manual of the connecting
device.
6
Press the select button to confirm.
"Connection Complete" appears and
connection is complete.
" " or " " appears during connection.
* Passcode may be called "passkey," "PIN code," "PIN
number" or "Password," etc., depending on the
device.
23