Functional Description - Milwaukee 2473-20 Manual Del Operador

eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
PRESS TOOL
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use tool without crimping head installed.
Fingers could be crushed.
• Keep hands away from crimping head while tool
is in use. Fingers could be crushed.
• To reduce the risk of injury, wear safety goggles
or glasses with side shields. Inspect and discard
workpieces with cracks or wear before use. Ma-
terials may crack or shatter.
• Use tool only with MILWAUKEE crimping heads
and to press-fit pipes and fittings for which they are
designed. Other uses may cause injury or damage to
the tool, accessories, and pipes. Leaking may result.
• Only use MILWAUKEE crimping head with a
compression range rated for this tool.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
MET Laboratories
United States and Canada
UL Listing for Canada and U.S.
C US
SPECIFICATIONS
Cat. No. ..................................................... 2473-20
Volts.............................................................. 12 DC
Watts .................................................................240
Nominal Force ...........................................5400 lbs
Compression Range .................< Ø 1-1/4" (32 mm)
Battery Type .................................................M12™
Charger Type................................................M12™

FUNCTIONAL DESCRIPTION

1. Start button
2. Fuel gauge
3. Red LED
4. Green LED
8
7
5. Crimping head
6. Retaining pin
7. Handle
8. Release button
3
3
1
2
6
4
5