Wr2 Wireless Sensor Alerts & Troubleshooting; Replacement Or Spare Parts - Rain Bird WR2 Serie Manual Del Usuario

Sensor. The Controller Interface "Sensor Indicator /
ming the second Controller Interface.
WR2 Wireless Sensor Alerts & Troubleshooting
Alert LCD Display
Initial Power
Up Failure
No Sensor Paired "Sensor Indicator / Pairing
Status" icon continues to
flash
Sensor Pairing "Sensor Indicator / Pairing
Broken Status" icon does not
signal strength
Low Battery "Battery Life Remaining"
illuminated

Replacement or Spare Parts

4. Repeat step 3 to pair additional Controller Interface units
to the Sensor.
5. When multiple Controller Interface units are paired to
tions only.
Description
do not appear indicating the
Controller Interface is not
During Installation: The sensor
does not pair and is not commu
Interface.
After the WR2 Wireless Sensor is
in operation: A sensor that does
signal strength to the Controller
Interface is no longer paired.
The Sensor has transmitted a
WR2 Wireless Sensor
Resolution
Interface to the Irrigation Controller.
1. Pair the sensor (see Section
reacquires the Controller Interface.
2. If you replace a sensor that is paired to the
four (4) or more years.
4
).
9