Remote Control - Yamaha A-S801 Manual De Instrucciones

CONTROLS AND FUNCTIONS

Remote control

6
En
1 Infrared signal transmitter
Sends infrared signals.
A
2
AMP
Turns this unit on, or sets it to standby mode.
3
OPEN/CLOSE
Opens/closes the disc tray of the Yamaha CD player.
Refer to the owner's manual of your CD player for
details.
Note
Even when using a Yamaha CD player, certain components
and features may not be available.
A
4
CD
Turns the Yamaha CD player on, or sets it to standby
mode. Refer to the owner's manual of your CD player
for details.
Note
Even when using a Yamaha CD player, certain components
and features may not be available.
5 CD DIRECT AMP
Reproduces CD sound in the highest signal quality
(see page 12).
6 Input selector buttons
Selects the input source you want to listen to.
y
The input source names correspond to the names of the
connection jacks on the rear panel.
7 VOLUME +/–
Increases or decreases the sound output level.
8 MUTE
Reduces the current volume level by approximately
20 dB. Press again to restore the audio output to the
previous volume level. Pressing the VOLUME +/–
also cancels muting.
The input indicator on the front panel for the current
input source blinks while the output is muted.
9 PURE DIRECT
Reproduces any input source in the purest sound
possible (see page 12).