Connections; Connecting Speakers And Source Components - Yamaha A-S801 Manual De Instrucciones

Connecting speakers and source components

Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty, no sound will
be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and
lack bass. Refer to the owner's manual for each of your components.
Make sure to use RCA cables, optical cable or USB cables to connect audio components.
CAUTION
Do not connect this unit or other components to the main power until all connections between components are complete.
Turntable
DVD player,
Audio Audio
GND
out out
Audio
out
CD player
Only PCM signals can be input to the DIGITAL (OPTICAL/COAXIAL) jacks of this unit. For details on the supported
PCM signals, see page 18.
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.

CONNECTIONS

etc.
Tuner
Audio
out
Audio Audio
out In
Tape deck,
etc.
TV, etc.
BD player, etc.
Audio Audio
out out
Audio Audio
In out
CD recorder, Subwoofer
etc.
Speakers A
Right Left
PC
Audio
out
Right
Speakers B
Left
9
En