Other Functions; Using An Aux Source; Using The Pgm Button - Pioneer DEH-P6200BT Manual De Instrucciones

Section
02 Operating this unit
S/W update (updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
! Never turn the unit off while the software is being
updated.
1 Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
Note
Operation is complete even if the menu is can-
celled before being confirmed.

Other Functions

Using an AUX source

Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to AUX1 or AUX2. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary device using a stereo
mini plug cable
% Insert the stereo mini plug into the
AUX input jack.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1.
22
En
AUX2 source:
When connecting an auxiliary device using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to an auxiliary device
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
This auxiliary device is automatically set to
AUX2.
# This type of connection can only be made if
the auxiliary device has RCA outputs.
Selecting AUX as the source
% Press SRC/OFF to select AUX as the
source.
# AUX cannot be selected unless the auxiliary
setting is turned on. For more details, refer to
AUX1/AUX2 (auxiliary input setting) on the pre-
vious page.

Using the PGM button

You can operate the preprogrammed functions
for each source by using PGM.
% Press PGM to turn pause on when se-
lecting the following sources:
! CD – CD player
! USB /USB-iPod – USB/iPod
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting tuner or "HD Radio" as the
source.
Press PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.