Local Area Code - GE 25983 Manual De Uso

Setting Day/Time
NOTE: This setting may only be made with the base.
Time is transmitted automatically by your local phone company as part of Caller ID
service. If you are subscribed to Caller ID service, the current time is set automatically
when you receive your first CID call. Otherwise, you can set the time manually.
The day of week is not set automatically by Caller ID. The day of week must be set
manually through base.
1. Press the menu/flash button until SET DAY shows in the display. Monday is the
default setting.
. Use the caller id (9 or :) button to select the current day.
3. Press menu/flash until SET TIME shows on the display. 12:00 AM is the default
setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the second
digit of the hour, the first digit of the minute, and the second digit of the minute.
5. Use the caller id (9 or :) button to scroll to AM or PM.
6. Press menu/flash again to store your selection. You will hear a confirmation tone.

Local Area Code

NOTE: This setting may be made with the base or the cordless handset.
1. Press the menu/flash button on base or the mute/menu button on handset until
SET AREA CODE - - - or AREA CODE - - - shows in the display. "- - -" is the default
setting.
. Use the base or cordless handset number pad to enter your three digit area code.
3. Press menu/flash button on base or the mute/menu button on handset again to
store your selection. You will hear a confirmation tone.
NOTE: To restore the default setting to - - -, press and release
delete button on base or delete button on handset when SET AREA
CODE or AREA CODE shows in the display.
19