Sony MDR-D5100 Manual De Instrucciones página 22

Indicator light
DECODE MODE DECODE MODE
DOLBY DIGITAL DOLBY DIGITAL
DOLBY SURROUND DOLBY SURROUND
DTS
C C
L L
LS LS
VIRTUAL
DECODE MODE DECODE MODE
DOLBY DIGITAL DOLBY DIGITAL
DOLBY SURROUND DOLBY SURROUND
DTS
C C
L L
LS LS
VIRTUAL
DECODE MODE DECODE MODE
DOLBY DIGITAL DOLBY DIGITAL
DOLBY SURROUND DOLBY SURROUND
DTS
L L C C
LS LS
VIRTUAL
Notes
• The processor automatically recognizes the decode mode (DOLBY DIGITAL/DOLBY
SURROUND/DTS), and the respective indicator light turns on. Select Dolby Digital or
DTS audio for the audio output at the connected player.
• The decode mode becomes DOLBY SURROUND in the following cases.
– When the signal received by digital input is PCM
– During analog input
GB
22
Operation
Output mode (surround effect)
OFF
Regular headphone playback.
R R
RS RS
VIRTUAL FRONT
Virtual effect where the sound seems to be coming from two
speakers (right and left) located in front of you.
R R
RS RS
VIRTUAL SURROUND
Virtual surround effect where the sound seems to be coming from
not only two front speakers (right and left), but also from one center
speaker, two rear speakers (right and left), and a subwoofer (when
DOLBY DIGITAL and DTS are lit).
The digital surround processor automatically identifies and
R R
processes according to the format of the input audio signal.
When DOLBY DIGITAL indicator is on: Audio recorded in Dolby
RS RS
Digital 5.1ch format is being processed.
When DOLBY SURROUND indicator is on: Audio recorded in Dolby
Surround (Pro Logic) format is being processed.
When DTS indicator is on: Audio recorded in DTS 5.1ch format is
being processed.