Husqvarna DM650 Manual De Instrucciones página 10

Ocultar thumbs Ver también para DM650:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Use and care
CAUTION! This machine is ideal for
!
drilling holes in concrete, bricks and
various stone materials. The machine is
intended for stand mounted drilling.
The machine is intended for use in industrial
applications by experienced operators.
Make sure that the stand is secured correctly.
Make sure that the drilling machine is secured
correctly in the stand.
Inspection and/or maintenance should be carried out
with the motor switched off and the connector
disconnected from the power source.
The machine has a very high torque. This demands
good concentration during work, as serious personal
injuries can occur if the drill bit suddenly jams.
Keep all parts in good working order and ensure that
all fixtures are properly tightened.
Always switch off the machine before you move it.
10 – English
OPERATING

Publicidad

Tabla de contenido
loading

Tabla de contenido