Safety - Husqvarna K 7000 Manual Del Usuario

WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
product. Refer to
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling location for
electrical and electronic equipment.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Cutting equipment decal
3
1
5
1. Cutting blade diameter
2. Max. speed of output shaft
3. Max. blade thickness
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
4
Kickback on page 16 .
4
5
2
4. Direction of rotation
5. Bushing dimension
Type plate
561 82 Huskvarna SWEDEN
5500W 4300rpm 016" /400mm
Row 1: Brand, Model
Row 2: Product id
Row 3: Manufacturing year, Serial No
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6: Output power, Cutting blade rpm, Blade capacity
Row 7: Country of origin
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

Note: Used to give more information that is necessary in
a given situation.
General power tool safety warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
Husqvarna K7000
HID 970449601 4NE
2019 472000402
Husqvarna AB
Made in Sweden
1448 - 003 - 13.02.2020