Intended Use - Skil Multi-Tasker 1400 Instrucciones De Funcionamiento Y Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SM 1619X05148 10-10:SM 1619X05148 10-10 10/12/10 9:43 AM Page 9
Thank you for purchasing the Skil Multi-Tasker.
This tool was designed to tackle a wide
variety of Skil Multi-Tasker projects. The Skil
Multi-Tasker tackles tasks that are tedious,
time consuming or simply next to impossible
to achieve with any other tool. The
ergonomic housing is designed for you to
hold and control in a comfortable manner
during operation.
It comes with an assortment of accessories
that are specifically designed for remodeling
work where you need precision and control.
Your Skil Multi-Tasker has a robust electric
motor, is comfortable in the hand, and is
made to accept a large variety of accessories
including flush cut blades, scraper blades,
LEARNING TO USE THE TOOL
Getting the most out of your oscillating tool is a
matter of learning how to let the speed and the
feel of the tool in your hands work for you.
The first step in learning to use the tool is to
get the "feel" of it. Hold it in your hand and feel
its weight and balance (Fig. 3). Depending on
the application, you will need to adjust your
hand position to achieve optimum comfort and
control. The unique comfort grip on the body of
the tool allows for added comfort and control
during use.
When holding tool, do not cover the air vents
with your hand. Blocking the air vents could
cause the motor to overheat.
IMPORTANT! Practice on scrap material first
to see how the tool's high-speed action
performs. Keep in mind that your tool will
perform best by allowing the speed, along with
the correct accessory, do the work for you. Be
careful not to apply too much pressure.
Instead, lower the oscillating accessory lightly
to the work surface and allow it to touch the
point at which you want to begin. Concentrate
on guiding the tool over the work using very
Introduction
grout removal wheels and sanding pads.
Accessories come in a variety of shapes and
permit you to do a number of different jobs.
As you become familiar with the range of
accessories and their uses, you will learn just
how versatile your Skil Multi-Tasker.
Visit www.Skil.com to learn more about what
you can do with your Skil Multi-Tasker
This Skil Multi-Tasker Tool is intended for dry
sanding of surfaces, corners, edges, for
scraping, for sawing soft metals, wood and
plastic components, and for grout removal
using the applicable tools and accessories
recommended by Skil (See page 13).
Operating Instructions
little pressure from your hand. Allow the
accessory to do the work.
Usually it is better to make a series of passes
with the tool rather than to do the entire job
with one pass. To make a cut, for example,
pass the tool back and forth over the work. Cut
a little material on each pass until you reach
the desired depth.
FIG. 3
-9-

INTENDED USE

Publicidad

Tabla de contenido
loading

Tabla de contenido