Vermeiren Luna Manual De Instrucciones página 24

N
Table (A) on Picture (B)
Symbol
A
B
C
D
E
F
G
H
With beds of which the side railings exceed the indicated
measure by less than 10%, such side railings must not be
used with small or underweight patients, or else additional
measures must be taken to avoid such patients from getting
clamped or sliding through.
Side railings that exceed the indicated values by 10% or
more, may until such time as the shortages have been
solved, not be used anymore and must be exchanged or
upgraded.
In addition to the following points, the full functionality (i.e.
locking, fixing elements) of the side railings must be checked.
Any defects must be eliminated. Observing the sizes of the
side railing components in accordance with the following
sketch.
Size
The smallest distance between the
elements within the circumference
of the side railings in an
erect/inserted position, or the area
included by the side railings and
fixed parts of the bed.
Thickness of the mattress in
accordance with regulatory use
Height of the top sides of the side
railings over the mattress (see 'B')
without compression.
Distance between the headrest or
food part and the side railings.
Distance between side railings
taken apart with the lying surface in
flat position.
Smallest distance of all accessible
openings between the side railing
and the lying surface.
Overall length of the side railings or
sum total of the lengths of the side
railings taken apart on one side of
the bed.
Distance between headrest and
foot-end without extension of these
parts.
Requirement in mm
Actual size:
A 120
As indicated by
Actual size:
manufacturer
C 220
Actual size:
D 60
or
Actual size:
D 235
E 60
or
Actual size:
E 235
If D 235 then F
60
Actual size:
If D 60 then
F 120
G 1/2 of the length
of the lying surface
Actual size:
No requirements
Actual size:
NA
NA
NA
NA
Page 22
2010-11
mm
mm
mm
mm
mm
mm
mm
mm
Yes No Remark
Yes No Remark
Yes No Remark
Yes No Remark
Luna