Transportation, Storage And Disposal; Technical Data - Husqvarna CG 200 Manual De Usuario

PROBLEMS
Ineffective operation
with jerks and consid-
erable vibration
Transportation
Consider the following points when transporting the
product.
• The height of the steering shaft can be adjusted by
rotating the knob (1).
Equipment technical data
CG 200
Cutting depth, max, mm
Useful working width, mm
Rated Voltage (V)
Weight (no fuel, no oil, excluding tools), kg
Dimensions (L x W x H), mm
Drum rotation speed (maximum off load), rpm
12
CAUSES
Drum position too low
Tools worn out
Groove or mill makes abnormal
vibration
Abnormal cutter wear

Transportation, storage and disposal

Technical data

REMEDIES
Check the drum (mills) fixture. Change the drum or the
cutters, brush, and so on.
Check the rotation of the cutters on the four shafts.
Change the drum or the cutters.
• Upon installation at the work site, the product can be
moved without running the engine simply by pushing
it along on its three wheels.
• A lifting eye (2) enables the lifting of the product.
Storage
WARNING: Store in a dry place in an upright
position, not accessible to children.
Disposal
In the event of deterioration and scrapping of the
product, the following items must be disposed of in
accordance with the requirements of the legislation in
force.
• Motor : Aluminium (AL), Steel (AC), Copper (CU),
Polyamide (PA)
• Product : Steel sheet (AC), Cast iron (FT),
Aluminium (AL)
Gasoline 5hp
13
200
N/A
54
780 x 470 x 730
1350
Gasoline 9hp
13
200
N/A
64
840 x 530 x 730
1350
130 - 003 - 18.08.2017