Maintenance; To Check Before Operation - Husqvarna CG 200 Manual De Usuario

2. Push the lever (1) forward to engage the drum.
Introduction
WARNING: Disconnect the product from the
power supply before you do maintenance.
CAUTION: Maintain the tools carefully.

To check before operation

1. Check the engine oil.
2. Carry out a general inspection checking that no nuts
or bolts are loose.
To check after operation.
CAUTION: Dispose of the old oil as laid
down by the regulations in force.
1. Clean the product.
10

Maintenance

2. Lubricate the grease nipples on the wheelbase (1),
depth adjustment bearing (2) and on the roller
bearings (3).
3. See the engine manual for motor oil replacement .
130 - 003 - 18.08.2017