Safety Instructions; General; Preparation; Use - Husqvarna TF338 Manual De Usuario

General

• These instructions are for your safety. Read them
carefully.
• Read all the instructions in this operator's manual and on
the machine before you start it. Ensure you understand
them and then observe them.
• If you have any problems or questions about the tiller,
please contact your Husqvarna dealer for more
information.
WARNING! Only use the machine for the
!
purpose it is designed for, tilling the ground.
Any other use may be dangerous or cause
damage to the machine.
• Learn how to use the machine and its controls safely and
learn to how to stop quickly. Also learn to recognize the
safety decals.
• The operator is responsible for any unsafe situations or
risks that people and property are exposed to.
• Never start to work with the machine before the working
area is clear and you have a firm foothold. Look out for any
obstacles with unexpected movement. Take great care
when working on sloping ground.
• Only allow the machine to be used by adults who are
familiar with its use.
• Never allow children or other persons not trained in the
use of the machine to use or service it. Local laws may
regulate the age of the user.
• Keep unauthorised persons at a distance. Children,
animals, onlookers and helpers should be kept outside the
safety zone of 20 m. Stop the machine immediately if
anyone approaches.
• Never use the machine if you are tired, if you have
consumed alcohol, if you are taking other drugs or
medication that can affect your vision, judgement or co-
ordination.
• Pay particular attention on hard ground.
• The machine has the tendency to be much less stable on
cultivated ground.
WARNING! This machine produces an
!
electromagnetic field during operation. This
field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this machine.
• Never use the machine when barefoot. Always wear
protective shoes or protective boots, preferably with steel
toes. Never wear loose-fitting clothing, jewellery or similar
that can get caught in moving parts. Use hearing
protection to minimise the risk of hearing impairment.

SAFETY INSTRUCTIONS

Preparation

• Inspect the working area. Remove all loose objects, such
as stones, broken glass, nails, steel wire, string, etc. that
could be projected by the machine.
• Check the entire machine before starting. Replace worn
or damaged parts. Check that there are no fuel leaks and
that all guards and covers are complete and fastened
securely. Check all nuts and screws.
• Check that the electrical wires are intact and in good
condition.

Use

• Never use the machine itself to transport people.
• Compliance with and strict adherence to the conditions of
operation, service and repair as specified by the
manufacturer also constitute essential elements of the
intended use.
• Stop the engine when the machine is not in use.
• Walk with the machine, do not run.
• Pay close attention when pulling the machine towards you
or reversing the direction of rotation.
• Keep a safe distance from the rotating blades, set by the
length of the steering column. Keep your hands and feet
away from the rotating blades.
• The engine and the exhaust system become very hot
during operation. Risk of burn injuries if touched.
• Only use the machine in daylight or in other well-lit
conditions.
• Do not use the machine on ground that slopes more than
20 ° .
• Work across slopes, not up or down.
WARNING! Under no circumstances should
!
you modify the original design of the
machine without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
The warranty is not valid if non genuine
parts are used.
Stop the engine immediately if the following occurs:
• Excessive vibration and / or noise.
• Mechanical jam preventing engine from turning.
• Difficulties to engage or disengage the clutch.
• A collision with a foreign object.
• Deterioration of the engine stop cable.
If the engine halt cable is severed, use the starter control to
stop the engine. For more information see section "Start the
engine"
Allow the machine to cool down. Disconnect the HT lead from
the spark plug. Check that the machine is not damaged. If the
machine is damaged, hand it in to an authorized service
workshop for repair.
– 4
English