Bluetooth Audio
2
Press MULTI-CONTROL to stop the play-
back.
Playback of the current song stops.
Disconnecting a Bluetooth
audio player
When you are done using your Bluetooth
audio player with this unit, you can close the
Bluetooth wireless connection.
1
Use MULTI-CONTROL to select
Disconnect audio in the function menu.
Disconnect audio appears in the display.
2
Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Displaying BD address of
this unit
Each device featuring Bluetooth wireless tech-
nology is allocated a unique 48-bit device ad-
dress. Each device address consists of a 12-
digit of hexadecimal string.
You can display the BD address of this unit.
1
Use MULTI-CONTROL to select
Device INFO. in the function menu.
The device name (Pioneer BT unit) of this unit
appears in the display.
2
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Note
When you push MULTI-CONTROL down while
the BD address (or the device name) of this unit
is displayed, the system version of this unit ap-
pears. About the system version, refer to Display-
ing system version for repair on page 57.
Displaying system version
for repair
Should this unit fails to operate properly and
you consult with dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
1
Use MULTI-CONTROL to select
Device INFO. in the function menu.
The device name (Pioneer BT unit) of this unit
appears in the display.
2
Push MULTI-CONTROL down to switch
to the system version of this unit.
The system (microprocessor) version of this
unit is displayed.
# Pushing MULTI-CONTROL left displays the
version of the Bluetooth module of this unit.
Pushing MULTI-CONTROL right returns to the
system version of this unit.
Section
09
61
En