External Recording; Analog Or Digital Recording; Automatic Track Increment; Recording With Automatic Start - Philips CDR-800 Manual Del Usuario

xp CDR 800/00 eng.-1.1 18-07-2001 13:54

External recording

Analog or digital recording

When making recordings from an external source, we
recommend to do analog recording only if digital recording
is not possible. Digital recording will usually result in better
sound quality.
See chapter "Connections" to see which connections are
required.
If a digital source is selected:
In case no digital signal is received, the input label
) starts flashing and NO SIGNAL is
( or
DIG OPT
displayed.
Press DISPLAY to display the input sample rate
0
(SRC XX, X KHZ).
BIT PERFECT is displayed when an exact CD standard
signal is received which can be recorded with Direct Line
Recording.
Automatic track increment for
analog sources
BRIGHTNESS
ABC
When digitally recording from a CD player/changer
(internal or external) track increments are automatically
taken over from the source.When recording from analog
(AUX ANALOG), track increment is done, based on
sources
silences (pauses) in the source material. Select one of the
following settings with the TRACK INCR(ement) key on the
remote control:
CD/DVD: when recording from CD, DAT, DCC or DVD;
TAPE/TUNER: when recording from a cassette deck or
tuner;
TURNTABLE: when recording from a record player,
MANUAL: switches the function off.
Default setting is TAPE/TUNER.
Notes:
Auto track increment is dependant on the quality of the
source material and therefore not always possible.
Track numbers can always be incremented manually by
pressing TRACK INCR(ement) on the remote control during
recording.The minimum track length is 4 seconds.
Track numbers cannot be changed after recording.
20
Pagina 20
TRACK INCR. CD TEXT
DEF GHI
1 2 3

Recording with automatic start

Recording with automatic start from an external
source
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
AUX DIGITAL is displayed if the digital coaxial input
(DIGITAL IN) is selected.
AUX OPTICAL is displayed if the digital optical input
(OPTICAL IN) is selected.
AUX ANALOG is displayed if the analog input
(ANALOG IN) is selected.
3 Press RECORD on the set to enter into the recording
menu.
Rotate the ¡ EASY JOG ™ control to select either:
4
AUX CD ?: for recording with synchronised start of an
entire disc;
AUX TRACK ?: for recording with synchronised start of
a single track.
5 Press YES to confirm your selection.
PRESS PLAY ON EXTERNAL SOURCE is displayed.
6 Start playback on the external source you wish to record
from.
The CD recorder starts to record simultaneously and
is shown.The remaining recording
RECORD IN PROGRESS
time of the CDR(W) is displayed.
Note: If you start recording within a track, recording starts at
the beginning of the next track or after a silence for analog
sources.
7 If a digital source is selected:
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
If an analog source is selected:
After the recording process, the CD recorder stops after
a silence of 20 seconds on the source material.
To stop manually, press STOP 9 on the set.
0
goes off.
RECORD IN PROGRESS
Do not forget to finalize!