Switching between Anynet + Devices
1.
2.
3.
%
%
%
%
%
Press the TOOLS button. Press the ENTER[E_ button to select Anynet + (HDMI-CEC).
Press the A or T button to select Device List, then press the ENTER C_ button.
Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
Press the A or _' button to select a particular device and press the ENTER C_ button. It is
switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Application menu, the Device
List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet + device by using the Device List.
Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet+ Menu
Description
View TV
Anynet+ mode changes to TV broadcast mode.
Device List
Shows the Anynet + device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
(device_name) Menu
DVD recorder will appear.
(device_name) Operation
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that support
Record: (*recorder)
the recording function.)
Stop Recording: (*recorder)
Stops recording.
Receiver
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
TV RemoteControl Buttons Available in Anynet+ Mode
Device Type
Operating Status
Available Buttons
After switching to the device, when the menu
Numeric buttons A/V/4/!_/ENTER
_#buttons
of the corresponding device is displayed on the
Anynet + Device
screen.
Color buttons / EXIT button
After switching to the device, while playing a file
[_
(Backward search) / _
(Forward search) /
[_
(Stop) / [_
(Play) / _L] (Pause)
Device with built-in
After switching to the device, when you are
Tuner
watching a TV program
V CH A button
Audio Device
When Receiver is activated
--VOL+
/ MUTE button
The Anynet + function only works when the active source on the TV remote control is set to TV.
The [_ button works only while in the recordable state.
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
The Anynet + functions do not operate with other manufacturers' products.
The [_,
_
operations may differ depending on the device.