6.2.2 SAFE Vehicle Belt Systems
THE FOLLOWING BELT SYSTEMS CAN BE USED
WITH YOUR CHILD RESTRAINT, IF the seat location
meets all other requirements of these instructions and
those in your vehicle owner's manual. LATCH can be
used in place of the following vehicle belt systems if your
vehicle is equipped with LATCH anchor points. Please
refer to vehicle owner's manual for LATCH locations and
section "7.3 With LATCH" page 27-29 for installation
instructions.
• Lap Belts - Manually Adjusted
When buckled, the belt is tightened manually by pulling
on the excess belt.
• Lap Belts with Automatic Locking Retractor (ALR)
The automatic locking retractor will not permit the lap
belt to lengthen once it is buckled. Tighten the belt by
feeding the belt back into the retractor while pushing
down hard on the child restraint.
20