Setup; Setup Location Requirements - Caso VC300 PRO Instrucciones De Funcionamiento Originales

14.6 Setup

14.6.1

Setup location requirements:

caso VC300 Pro
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfill the following prerequisites:
• The device must be set up on a solid, even, horizontal
surface capable of supporting the vacuum sealer and any
items to be vacuum-sealed.
• Select a setup location where children cannot reach the hot
sealing strip of the device.
• Do not set up the unit in a hot or damp environment or near
flammable material.
• To operate correctly, the unit requires sufficient air flow.
Leave at least 10 centimeters (4 inches) of space on all sides
when setting up the unit.
• Do not move the vacuum sealer when it is in operation.
• The electrical outlet must be easily accessible so that the
plug can be quickly disconnected in the case of an
emergency.
• The setup of this unit in non-stationary locations (e.g., boats,
airplanes, motor homes) must be carried out by a qualified
electrician, provided they guarantee the prerequisites for the
safe use of the unit.
47