Electrical Connection; Extension Cords - Caso VC300 PRO Instrucciones De Funcionamiento Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115

14.7 Electrical connection

14.7.1

Extension cords

caso VC300 Pro
In order to ensure the safe and trouble-free operation of the
device, the following instructions must be observed for the
electrical connection:
• Before plugging in the unit, compare the voltage and
frequency data on the vacuum sealer's rating plate (found on
the bottom of the unit) with that of your electrical network.
This data must be compatible. If in doubt consult a qualified
electrician.
• The electrical outlet must be protected by a 16A safety cut-
out switch.
• The use of a multi-plug outlet adapter is not recommended
due to fire danger.
• Inspect the power cord for damage and ensure it doesn't run
under the unit or over hot or sharp surfaces.
• The electrical safety of the unit is only guaranteed if it is
connected to a properly installed protective conductor
system. Use of the unit without a protective conductor is
prohibited. If in doubt, consult a qualified electrician. The
manufacturer cannot be made responsible for damages due
to a missing or damaged protective conductor.
If an extension cord is used:
► The electrical rating of the extension cord should be at least as
great as the electrical rating of the unit.
► The cord should be arranged so that it does not drape over a
countertop or tabletop where it can be pulled on by children or
tripped over.
48

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido