Replace Rubber Seal - Abicor Binzel TSi Instructivo De Servicio

9 Maintenance and cleaning

9.4 Replace rubber seal

Carry out each step in accordance with the figures below:
1
A
C
B
1 Rubber seal
Fig. 11 Replace rubber seal
NOTICE
• The rubber seal to be used depends on the outer diameter of the gas nozzle. A deviation of ±1 mm in the outer
diameter of the gas nozzle is permitted.
1 Unscrew the device cover (2) using the bayonet closure and press out the rubber seal (1).
2 Replace the rubber seal (1) and press into the device cover (2).
3 Mount the device cover (2) using a bayonet closure.
EN - 16
2
D
2 Device cover 3 Sealing surfaces 4 Bayonet closure
BAL.0468.0 • 2019-11-04
TSi injection unit
3
4