Hilti SL 6-A22 Manual De Usuario página 12

▶ Check the tool and batteries for damage before use after long periods of
transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the tool and batteries in a place that is as cool and dry as possible.
▶ Never store batteries in direct sunlight, on heating units or behind a
window pane.
▶ Store the tool and batteries in a place where they cannot be accessed by
children or unauthorized persons.
▶ Check the tool and batteries for damage before use after long periods of
storage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
8.1 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, contact Hilti Service.
Trouble or fault
The battery does
not engage with an
audible double click.
1 LED flashes.
The device does not
work.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
8 English
Printed: 22.10.2018 | Doc-Nr: PUB / 5458888 / 000 / 00
Possible cause
The retaining lugs on the
battery are dirty.
The battery is
discharged.
The battery is too hot or
too cold.
Action to be taken
▶ Clean the retaining
lugs and push the
battery in until it
engages.
▶ Change the battery
and charge the empty
battery.
▶ Allow the battery to
cool down or warm
up slowly to room
temperature.
2195846
*2195846*