Personal Safety - Hilti SL 6-A22 Manual De Usuario

2 Safety
2.1 Use and care
▶ Use the product only when it is in perfect working order.
▶ Never tamper with or modify the product in any way.
▶ Keep the product out of reach of children.
▶ Do not use the product where there is a risk of fire or explosion.
▶ Use the product in a dry environment only.
▶ Replace the complete cordless lamp when the light source has reached
the end of its life. The light source in this cordless lamp is not replaceable.
▶ Do not look into the beam and do not direct the beam toward other
persons.
▶ Whenever you suspend the product by means of the scaffold hook, make
sure that it is securely and safely positioned.

2.2 Personal safety

The user and the persons in the vicinity must wear suitable protective
goggles, protective gloves and a hard hat while the product is in use!
2.3 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
Lamp head
@
LEDs
;
Vertical pivot joint
=
Battery
%
Switch for mode change
&
(brightness)
Locking switch, vertical
(
*2195846*
Printed: 22.10.2018 | Doc-Nr: PUB / 5458888 / 000 / 00
1
)
+
§
/
:
∙
2195846
Heat sink
Carrying handle
Battery state of charge indica-
tor
Battery release button
Suspension/attachment hook
5/8" thread for tripod mount
English 3