Gima 32597 Manual Del Usuario página 60

5.2.2 Data Record Settings
The device can store the measured data.Users can review the waveform
or upload recorded data to the computer with data line to display and analyse.
1) ECG recording
Start recording in the ECG monitor interface
a. Short press
enter data record interface, select "YES" to record, "NO" to back to main menu.
b. Long press
Stop recording in the ECG monitor interface
a. Short press
to "Record", press
to back to main menu and keep recording.
b. Long press to exit the record mode
If the record mode is open, the monitor interface will show a symbol of "REC"
and a flicker dot, which indicates in the storage state.
2) SpO2 recording
Start recording in the SpO
a. Short press
to enter data record interface,select "YES" to record, "NO" to back to main
menu.
b. Long press
Stop recording in the SpO
a. Short press
"Record" to stop recording menu, "YES" to stop recording, "NO" to back to
main menu and keep recording.
b. Long press to exit the record mode
If the record mode is open,the monitor interface will show a symbol of "REC"
and a flicker dot, which indicates in the storage state.
5.2.3 File Operations
Select "Files" in main menu to enter file interface as Fig. 5-5 to operate the ECG
file, SpO file and delete all files.
2
Fig. 5-5 File interface
ENGLISH
to enter main menu, move the selection bar to "Record" to
OK
to enter record mode.
OK
to enter menu in record mode,move the selection bar
OK
to stop recording menu, "Yes" to stop recording, "NO"
OK
OK
monitor interface
2
to enter main menu, move the selection bar to "Record"
OK
to enter record mode.
OK
monitor interface
2
to enter main menu, move the selection bar to
OK
OK
60