Alarm Operation; Charging Operation - Gima 32597 Manual Del Usuario

5.2.7 Exit
Move the selection bar to "Exit", press "OK" to exit the interface.

5.3 Alarm Operation

5.3.1 Alarm PRI
Alarm including the alarm of measure data's going beyond the limits, the alarm
of low-voltage, the alarm of finger's out of position.
Alarm PRI: the alarm of low-voltage > the alarm of finger's out of position = the
alarm of measure data's going beyond the limits.
5.3.2 Alarm Recognised Methods
1) Low voltage alarm:battery power is draining away and flashing incessantly.
When the battery power is not enough for supplying the apparatus normal
work,the screen shows "Low Power" and turn off automatically;
2) Finger out alarm:sound alarm and at the same time the screen shows
"Finger Out";
3 Except for above sound alarm,the others are considered as the tested value
exceed the limit alarm.

5.4 Charging Operation

There are two kinds of charging methods:
1) Connect the device with computer by data line,the indication light is on
then the device should be under charging state.
2) Connect one end of the adapter to power socket,the other end to the device
by data line.
The indicator prompts: The indicator shows orange in charging state and shows
green when the charge has finished.
NOTICE:
To ensure measure exactly,when the battery power is low, the battery should be
charged.
ENGLISH
64