Help; Exit; Chapter 7 Cleaning Disinfecting And Maintenance; Cleaning - Gima 32597 Manual Del Usuario

6.7 Help

Run the help system of this software.

6.8 Exit

Exit and shut down this software.
Chapter 7
CLEANING DISINFECTING
AND MAINTENANCE

7.1 Cleaning

Keep the outside surface of the device clean and free of dust and dirt,
and clean exterior surface of the device(including LCD screen) with a dry, soft
cloth. If necessary, clean the chassis with a soft cloth soaked in a solution
of soap or water, and wipe dry with a clean cloth immediately.
Attention:
 Before cleaning, switch off the power.
 Don't use the strong solvent, such as acetone.
 Never use an abrasive such as steel wool or metal polish.
 The temperature of the water which is used for cleaning the device should be
below 60°C.
 Do not allow any liquid to enter the product,and do not immerse any parts
of the device into any liquids.
 Avoid pouring liquids on the device while cleaning.
 Don't remain any cleaning solution on the surface of the device.

7.2 Disinfecting

After cleaning the device, wipe the surface of device with ethanol, self-air dry
(or clean with a clean, dry cloth).
Attention:
 Never try to sterilize the equipment by low pressure steam or high
temperature sterilizing process.
 Do not use E-beam or gamma radiation sterilization or other methods.
ENGLISH
82