Operation - Greenlee FC-110 Manual De Instrucciones

Operation

Keep your hands away from the Rogowski coil and conductor to be measured.
Disconnect all power supplies from the device before measurement. When measuring
uninsulated conductors, do not power on the wire to be tested until the meter has
safely clamped the wire.
1. Turn off the clamp meter as well as the conductor being measured.
2. Unlock the clamp according to Figure 3
3. Use the measuring head to wrap around the conductor to be measured and lock it
in place. (Only one wire can be tested at a time; See Figure 4)
2
6
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
FC-110
1
FC-110
Figure 3
Figure 2
FC-110
Figure 4