Using Your Machine; Using The Blender; Recommendations For Use - Brandt BLE515R Manual De Instrucciones

3) USING YOUR MACHINE

a)

Using the Blender

1. Place the machine on a stable flat surface.
2. Before plugging the blender in, check that the glass jar (C) is correctly in place on the
motor unit (E).
This blender is fitted with a safety system which locks the mechanism if the jar is not
correctly fitted.
1. Plug the blender into the electric socket.
2. Remove the lid of the blender (B).
3. Add the ingredients to the glass jar (C) through opening in the lid.
Do not fill the jar beyond the maximum level.
The temperature of food to be mixed must not exceed 60°C.
4. Select the speed by turning the selection button (F) to "1" or "2" depending on the
consistency of the food you wish to blend. Turn the control button to "0" to turn the
machine off.
5. To mix using short pulses turn the control button to the left (P function) as often as you
wish to obtain the desired mixture. This function can also be used to clean the jar. To do
this, pour water and a drop of washing-up liquid into the blender.
It is possible to add ingredients when the machine is in operation. To do this,
unscrew the measuring cap (A) by turning it anti-clockwise, as in the picture below:
1. Once your preparation is ready, turn off the machine by placing the control button on "0".
2. Unplug the blender from the electric socket.
3. You can now empty the jar by removing the lid and taking the jar off the motor unit.
b) Recommendations for Use
If you are not satisfied with your preparation the following recommendations could be useful:
1. Put small portions into the jar as mixing is carried out rather than mixing the whole
quantity at the same time.
16