Display Ups/Power Conditions; Enable/Disable Alarm - Tripp-Lite LCDT Serie Manual Del Propietário

Basic Operation

Display UPS/Power Conditions

Line Power Mode LCD Data
The LCD screen o ers 6 screens of UPS and site power information as the UPS is operating in line power mode. To advance to the next
screen, press the button. The screens are displayed in this order:
1. OUTPUT VOLTAGE
4. OUTPUT LOAD WATTAGE
Battery Power Mode LCD Data
The LCD screen o ers 6 screens of UPS and site power information as the UPS is operating in battery power mode. When the UPS
switches to BATTERY MODE, the UPS will automatically switch to report ESTIMATED RUNTIME. To advance to the next screen, press the
button. The screens are displayed in this order:
1. ESTIMATED RUNTIME
4. OUTPUT LOAD PERCENTAGE

Enable/Disable Alarm

To enter silent mode, press and hold the
indicate the unit is in silent mode. To exit silent mode, press and hold the
disappear from the LCD screen to indicate it's no longer in silent mode. Note: Silent mode can only be selected while the unit is in online
mode. Silent mode will deactivate the beeper completely.
To temporarily mute the alarm while the unit is in battery mode, press and hold the
screen to indicate that the alarm has been temporarily muted.
temporarily muted.
12-12-069-93-327C.indb 6
continued
2. INPUT/OUTPUT FREQUENCY
1
1
MUTE
MUTE
5. INPUT VOLTAGE
4
4
MUTE
MUTE
2. OUPUT VOLTAGE
1
1
MUTE
MUTE
5. OUTPUT LOAD WATTS
4
4
MUTE
MUTE
button until you hear an audible beep. The
3. OUTPUT LOAD PERCENT
2
2
MUTE
MUTE
6. BATTERY VOLTAGE
5
5
MUTE
MUTE
3. OUTPUT FREQUENCY
2
2
MUTE
MUTE
6. BATTERY VOLTAGE
5
5
MUTE
MUTE
button until you hear an audible beep. The
button until the
Note: The low battery alarm will still sound even if the battery alarm is
6
3
3
6
6
3
3
6
6
icon will appear on the LCD screen to
icon on the LCD
12/6/2012 9:28:36 AM
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
icon will