Quick Installation; Optional Installation - Tripp-Lite LCDT Serie Manual Del Propietário

Ocultar thumbs Ver también para LCDT Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Quick Installation

STEP 1: Plug the UPS into a properly grounded outlet.
After plugging the UPS into a wall outlet, press and hold the POWER
second to turn on the UPS (See Basic Operation Section).
Note: The UPS will not turn on automatically in the presence of live utility power.
STEP 2: Plug your equipment into the UPS.
There are two sets of outlets on the back of your UPS. Outlets marked SURGE PROTECTED
do not provide battery backup power during power outages. Connect common desktop
items like printers, scanners and other accessories not requiring battery support to these
outlets.
Outlets marked BATTERY/SURGE PROTECTED
power failures. Connect your vital computer equipment into these outlets.
Your UPS is designed to support electronic equipment only. You will overload the UPS if
the total VA ratings for all the equipment connected to the BATTERY/SURGE PROTECTED
outlets exceed the UPS output capacity. To find your equipment's VA ratings, look on their
nameplates. If the equipment is listed in amps, multiply the number of amps by 120 to
determine VA. For example: 1 amp × 120 = 120 VA. If you suspect you have overloaded
the outlets, check the Load Percentage and Load Meter screens (See Display UPS/Power
Conditions descriptions in Basic Operation Section). If you are still unsure, run a self-test
(See Self-Test description in Basic Operation Section).

Optional Installation

All models include USB communication ports, tel/DSL/Ethernet (Not compatible with PoE
applications) surge protection jacks and coaxial line protection jacks. These connections
are optional; the UPS will work properly without these connections. See the connector's
description in the Basic Operation section for connection instructions.
If the LINE POWER icon
does not illuminate when the UPS is turned ON, try the following:
1. Make sure that the UPS is plugged into a live AC outlet.
2. Press and hold the POWER
sound when the UPS starts.
3. If the UPS still does not start, contact Tripp Lite Tech Support for assistance.
12-12-069-93-327C.indb 3
offer UPS battery backup support during
BUTTON for one second to turn on the UPS. A beep should
BUTTON for one
3
12/6/2012 9:28:35 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Smart1500lcdtOmni1500lcdtSmart1300lcdt

Tabla de contenido