Noise/Vibration Information; Declaration Of Conformity; Battery Charging - Bosch GDR 14,4 V-EC Professional Manual Original

Gdx 14,4 v-ec professional; gdx 18 v-ec professional
Ocultar thumbs Ver también para GDR 14,4 V-EC Professional:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OBJ_BUCH-2047-001.book Page 16 Monday, February 3, 2014 11:18 AM
16 | English
Cordless Impact Screwdriver
Maximum torque, hard screwdriving
application according to ISO 5393
– ¼" hexagon socket
–  ½"
Bolt size
Tool holder
Weight according to EPTA-Procedure
01/2003
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
Recommended batteries
* Limited performance at temperatures <0 °C

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of the
2
2
tool: a
=13.5 m/s
, K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
2 609 140 921 | (3.2.14)
GDX 14,4 V-EC
Nm
160
Nm
175
mm
M6 – M16
¼" hexagon
socket/ ½"
kg
1.6
°C
°C
°C
GBA 14,4V x,xAh M–.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
.
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
03.02.2014
Assembly

Battery Charging

 Use only the battery chargers listed on the accessories
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
Observe the notes for disposal.
GDX 18 V-EC
160
175
M6 – M16
M6 – M16
¼" hexagon
¼" hexagon
socket/ ½"
socket/ ½"
1.4
GDR 14,4 V-EC
GDS 14,4 V-EC
GDX 14,4 V-EC
0...+45
–20...+50
– 20...+60
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
machine has been automatically switched off. The bat-
tery can be damaged.
170
170
185
185
M6 – M16
¼" hexagon
socket/ ½"
1.7
1.5
GDR 18 V-EC
GDS 18 V-EC
GDX 18 V-EC
0...+45
– 20...+50
– 20...+60
GBA 18V x,xAh M–.
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Tabla de contenido