Useful Features For Playback; Using A Tv's Remote Control To Operate The Unit (Hdmi Control) - Yamaha ATS-1080 Manual De Instrucciones

Useful features for playback

Using a TV's remote control to operate
the unit (HDMI control)
The HDMI control function coordinates TV and unit operation so that
the unit can be operated using the TV's remote control.
When the unit is connected to a TV via HDMI cable, the TV's remote
control can be used to perform the following operations.
Operations that can be controlled via the TV's remote control
a
b
c
d
Turn on/off
1
Both the TV and the unit turn on/off at the same time.
Switch input sources
2
The unit's input source switches accordingly when the TV's input
source is switched.
For example, when a TV program is selected on the TV, the unit's audio
input source is switched to the HDMI OUT (ARC) jack using the ARC
function or TV input jack.
And also, when a BD/DVD player is connected to the HDMI IN jack on
the unit, the unit's input source switches to HDMI when the BD/DVD
player is selected with the TV's remote control.
Switch the audio output device
3
You can switch the audio output device to the TV or the unit.
Adjust volume
4
The unit's volume can be adjusted when the TV's audio output is set to
the unit.
NOTE
▪ If you are unable to operate the unit with your TV's remote control, configure the
HDMI control function of your TV and the unit. For details, see the following:
– "Configuring the HDMI control function" (p.35)
▪ The input source can be switched while the unit is off (HDMI signal pass-through).
▪ The volume displays on the TV and unit may not be the same.
32
En